This 1,000W LED grow light is the largest output fixture I have ever tested and is very impressive. Designed for experienced growers who want to push the performance of their grow area to the limit in terms of yield per square foot.

Support the channel and get 5% discount on Photontek LEDs with the code MIGRO here: Buy Photontek here (US and Canada only)

Photontek XT 1000W co2 PRO

Photontek XT 1000W co2 PRO

Overview

The Photontek XT 1000W CO2 PRO LED grow light is a high quality fixture, exactly what we would expect from this long established grow light company (Their parent brand Lumatek has been producing high quality grow lighting equipment for almost two decades). It is easy to assemble and hang, the finish is excellent and has all the features you would expect from a commercial fixture including:

  • High Efficiency
  • High quality LEDs (Philips Lumiled and Osram)
  • Control systems compatibility
  • IP65 (we room rated)
  • 5 year warranty

However this fixture has one goal in mind: increase the PAR intensity to levels about twice as high as was typical only a few years ago with High end HPS lighting systems.

Does it makes sense to push average PAR intensity to over 1,100 µmols/m²/sec?

There are two main factors driving this increase in what is possible:

As grow lights have become more efficient and heat output from their lights reduces. This enables growers to increase the average PAR levels higher and keep their environment and canopy temperatures within acceptable limits.

The technology and knowledge required to supplement CO2 to 3 or 4 times normal levels has become more accessible and affordable.

With normal atmospheric CO2 levels increasing average PAR intensity above about 750 µmols/m²/sec has a reduced return.

PAR intensity vs growth rate

PAR intensity vs growth rate

 

However increasing the CO2 levels in the grow to match the PAR intensity improves the growth rate when PAR intensity is pushed up to the highs of about 1,500 µmols/m²/sec achieved with the Photontek XT 1000W CO2 PRO

Average PAR vs growth rate CO2 added

Average PAR vs growth rate CO2 added

This LED grow light is designed to take advantage of these developments so growers can increase their yield per square foot 40% – 60% higher than achievable before.

Photontek XT 1000W co2 PRO has onboard dimming as standard

Photontek XT 1000W co2 PRO has onboard dimming as standard

Recommended Coverage: 5ft x 5ft (1.5m x 1.5m)

Physically big, just under 4ft x 4ft in size, this 10 bar LED grow light also delivers an average PPFD (Photons of PAR light) of over 1,100 µmols/m²/sec in a 5ft x 5ft  grow area with an excellent light spread and very even coverage.  This is 60% higher PAR intensity than the most efficient 1,000W DE HPS on the market can deliver in the same space with a much better light spread and about 40% less heat to be removed from the grow area.

Features

The fixture is very high quality in construction, easy to assemble and has on board dimming as well as connectivity to the Photontek controller system which can control multiple fixtures with all of the features any grower would need.

LEDs and Spectrum output

Photontek use Lumiled white and Osram LEDs to deliver a balanced Full spectrum designed for full cycle growing from seed to harvest

 

Photontek XT 1000 PRO grow light spectrum

Photontek XT 1000 PRO grow light spectrum

 

MIGRO Test results

The Photontek XT 1000 CO2 PRO was setup in our 5ft x 5ft test area and hung at 20″. We took 100 measurements of PAR intensity (PPFD) on a 10 x 10 grid across the target area (simulating a plant canopy) with an Apogee SQ500 Quantum sensor. The target area was surrounded with highly reflective material to simulate real world performance in a grow tent environment.

The result is extremely impressive. The power consumed at the wall was 1,014 watts and the average PAR of 1,104 µmols/m²/sec in a 5ft x 5ft  grow area means the Photontek XT 1000 CO2 PRO has a real world system efficiency of 2.45 µmols/watt (usable PPF/watt).

 

 

Photontek XT 1000W CO2 PRO PAR test result

Photontek XT 1000W CO2 PRO PAR test result

Value for money

This is a high quality and high performance commercial fixture and so it is not cheap. However an system efficiency of 2.45 µmols/watt (usable PPF/watt) will keep running costs down in terms of electricity and heat removal. A warranty of 5 years is exceptional and will give growers peace of mind when investing in this fixture.

Where to buy

Support the channel and get 5% discount on Photontek LEDs with the code MIGRO here: Buy Photontek here (US and Canada only)

European and UK customers brand Lumatek LEDs here: UK & European customers buy this light under the Lumatek brand

Photontek XT 1000W co2 PRO

Photontek XT 1000W co2 PRO

Detailed Specifications

Efficacy: 2.9 µmol/J
PPF: 2925 µmol/s
Input Voltage: 120-277V, 50-60Hz
Driver: 1000W 120V-277V with Twist Lock capability
Input Power (100%): 1005W (277V); 1025W (120V)
Coverage Area: 5’x5’ with Supp. CO2; 6’x6’ without Supp. CO2 used at higher heights.
Waterproof: IP65
Lifetime: 60 000 Hrs
Light Distribution: 120°
Light Source: Higher Spec Osram and Lumileds Philips Diodes
Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
External Control: With Digital Controller
Weight: 39.68 Lbs
Dimensions: 46.50’’x 42.95’’ x 4.16’’
Spectrum: Full Spectrum

 

shop migro